
XERF Lifting in Apgujeong: Treatment Planning and the Causes of Sagging
For anyone looking into XERF in Apgujeong, here is an overview of how its dual 6.78MHz and 2MHz radiofrequency works, how tissue responds depending on skin thickness, how to tell the causes of sagging apart, and what to check about pain and recovery.
One person says the skin around their cheeks has thinned and fine lines have increased. Another says their skin is fairly thick but their jawline alone has lost definition. In the clinic, we often see both describe their concern the same way: "my face has sagged." The words may be the same, but skin thickness and the cause of sagging are often quite different.
That is why consultations about XERF in Apgujeong often lead to questions like "Can I have it if my skin is thin?" or "If my skin is thick, does it need to be stronger?" Before you plan a XERF treatment, here is what is worth knowing, in order: how dual radiofrequency works, how tissue responds depending on skin thickness, how to tell the causes of sagging apart, and what to expect with pain and recovery.



6.78MHz and 2MHz: the two radiofrequencies XERF uses
XERF is a non-invasive lifting device that uses monopolar radiofrequency (Monopolar RF). The basic principle is that the electrical resistance radiofrequency meets as it passes through tissue turns into heat, and this thermal stimulus changes the structure of collagen and then leads to a remodeling response.
What sets it apart from other devices is that it uses not one frequency but two, 6.78MHz and 2MHz. Changing the frequency can change how energy spreads within tissue, so the device settings are used to adjust how heat is delivered.
There is, however, an easy point to misunderstand. The two frequencies are not divided so that each reaches only a set layer of skin or arrives precisely at a specific depth. The actual tissue response differs with skin thickness, the electrical properties of the tissue and treatment conditions. That is why, when looking into XERF in Apgujeong, you should check whether the energy settings are tailored to your current skin rather than focusing on the frequency numbers.




Different skin thickness means a different thermal response
Skin thickness is not uniform across one person's face. The skin around the eyes and temples tends to be thin, while the thickness of the dermis and fat layer around the cheeks and jaw varies considerably from person to person. These structural differences can also affect the thermal response produced when XERF's radiofrequency energy is delivered.
If your skin is thin and you also have little fat, the condition of the surrounding tissue and the energy settings need to be considered even more carefully. Conversely, thick skin does not necessarily call for strong energy, because dermal thickness and the amount of subcutaneous fat are separate factors, and the causes of sagging also differ from person to person.
What Dr. Lee Young-hoon, our Chief Director, emphasizes in lifting consultations is not stopping at a single judgment of thin or thick. A XERF treatment plan in Apgujeong should include checking fat distribution and the degree of lost elasticity along with skin thickness.




Why the causes of sagging need to be separated first
Not every face that looks saggy started from the same tissue. In some cases the skin has loosened as the collagen structure of the dermis changed, and in others the facial lines have changed as the position of fat or the deep supporting tissue shifted.
Take sagging around the cheeks as an example. You need to consider whether the skin itself has lost elasticity or whether changes in fat and supporting tissue are the main cause. Only once this distinction is made can you estimate the changes and limits to expect from XERF.
XERF is a device that triggers a tissue tightening response with radiofrequency heat, but it cannot improve every form of sagging to the same degree. If changes in deep tissue are the main cause of sagging, other treatment options may need to be considered. So when thinking about XERF in Apgujeong, it is better to first find out which tissue changes are creating your concern than to ask how much your face can be lifted.




Pain, recovery and when results appear
XERF has a cooling function that keeps the skin surface temperature from rising too high. It is designed to reduce excessive heat on the epidermis during treatment, but having this function does not mean there is no pain at all.
Depending on your skin condition and the energy settings, you may feel warmth, stinging or pressure. After treatment, temporary redness, swelling and tenderness may occur, and side effects such as burns, fat atrophy and changes in sensation are also possible.
Even if your skin feels tighter right after treatment, that is hard to regard as the final result. Collagen remodeling takes time, and the size of the change and how long it lasts also differ from person to person. When planning a XERF treatment in Apgujeong, we recommend going over your previous lifting history, skin sensitivity and the expected recovery process.




The cause of sagging, not skin thickness, is the standard
Thin skin does not mean only weak energy can be used, and thick skin does not mean strong energy is needed. XERF is a device that can use two radiofrequencies and a range of settings, but that alone does not make it suitable for every kind of skin.
This is why skin thickness, fat distribution and where the sagging appears need to be looked at together. If you are considering XERF in Apgujeong, check not only the device's features but also the changes you can expect in your skin and the limits of the treatment. What needs to be weighed in lifting is not the strength of the energy but a judgment about which approach suits your skin now. We encourage you to decide on a treatment plan carefully based on this standard.




Questions we often hear in XERF consultations
How does XERF lifting work? It delivers heat to tissue with 6.78MHz and 2MHz monopolar radiofrequency, triggering a thermal response in collagen and the remodeling process that follows.
Is XERF difficult to have if my skin is thin? Thin skin alone does not decide whether treatment is possible. Whether it suits you is judged after looking at skin thickness, fat volume and sensitivity.
If my skin is thick, does the energy need to be higher? Not necessarily. Energy settings are decided by considering dermal thickness, fat distribution and the cause of sagging together.
Can XERF alone solve all facial sagging? It is a tightening treatment that uses radiofrequency, so it cannot improve changes in the deep supporting tissue to the same degree. The right treatment can differ depending on the cause of sagging.
How much recovery time should I plan for? Redness, swelling and tenderness may appear, and the time needed to recover differs from person to person. When to return to your daily routine is also decided based on how your skin responds.
Written by : Dr. Lee Young-hoon, Chief Director, RIOVE Clinic, Profile Last reviewed : 2026-11-15 This article contains general medical information. Treatment results and recovery vary from person to person, and side effects such as redness, swelling, burns, fat atrophy or changes in sensation may occur. Individual diagnosis and treatment plans are determined through an in-person consultation.
If a treatment interests you, we'll go over it together in the exam room
Whether a treatment is suitable, and how it is done, is decided after we check your individual condition. For more details, please call our main line.
