
Ultherapy Prime at an Apgujeong Rodeo Dermatology Clinic and Hollow Cheeks in Slim Faces
For anyone with little cheek fat who worries about hollowing after lifting, here is an overview of how Ultherapy PRIME works at an Apgujeong Rodeo dermatology clinic, why the fat layer is assessed, how depth is chosen, and the changes after treatment.
Quite a few people hesitate about Ultherapy because their face is slim. If the area below the cheekbones is gaunt or there is little fat in the cheeks, they are bothered by lost firmness but also worry that their face will look even thinner after treatment. In this case, you need to look not only at sagging but also at the thickness of the fat layer and how facial volume is distributed.
Hollow cheeks are exactly what people ask about most when consulting about Ultherapy PRIME at an Apgujeong Rodeo dermatology clinic. Below, we go through the features of Ultherapy PRIME and what is worth checking before treatment if your face is slim, one question at a time.



What kind of device is Ultherapy PRIME?
Ultherapy PRIME is a lifting device that uses micro-focused ultrasound with visualization (MFU-V). It concentrates ultrasound energy at a set depth beneath the skin to create small thermal coagulation points, and this thermal stimulus triggers a response in which collagen is denatured and then reorganized.
The V in MFU-V means ultrasound imaging is used at the same time. Viewing the tissue beneath the skin on screen can help in deciding where to deliver the energy, because sagging seen in the mirror does not reveal everything about the condition of the underlying tissue.
On a slim face, the fat layer may be thin or vary greatly in thickness from area to area, so this checking process is even more necessary. When considering Ultherapy PRIME at an Apgujeong Rodeo dermatology clinic, we too look first at where the target tissue lies rather than at the number of shots.




Why the fat layer comes first on a slim face
Facial fat is not just tissue that determines whether a face looks full or thin. It also helps create the three-dimensional contour around the cheekbones, cheeks and jaw. As the distribution of fat and the supporting tissue change with age, the face can look hollow or give the impression that the skin has slid downward.
What we would like you to know is that skin condition varies even among slim faces. Some faces lack volume but still retain relatively good elasticity, while others have a thin fat layer and lax skin as well.
Treating without fully considering this difference can lead to unexpected reactions. Fat atrophy and changes in volume, which can rarely occur after Ultherapy, also need to be considered. That is why, in Ultherapy PRIME consultations at an Apgujeong Rodeo dermatology clinic, Dr. Lee Young-hoon, our Chief Director, looks at the degree of sagging together with the volume in your face that should be preserved.





Choosing depth to match skin thickness
Ultherapy PRIME uses transducers with different target depths. A transducer is the part that delivers ultrasound energy into the skin tissue, and there are three typical settings.
- 1.5mm targets the relatively shallow dermis.
- 3.0mm is used when the deep dermis and the area near the subcutaneous tissue are being considered.
- 4.5mm is a setting for reaching the deep subcutaneous tissue or the area near the fascial layer (SMAS).
Sending energy deeper does not make results better. Skin and fat layer thickness differ from area to area, and even at the same depth, the tissue the energy actually acts on can differ.
If you have little cheek fat, it is essential to compare the target depth with where the fat layer lies. When planning Ultherapy PRIME at an Apgujeong Rodeo dermatology clinic, we also decide the treatment area and energy settings after checking your skin structure. The key is not how deep to go but judging which tissue to target in your skin as it is now.





What changes can I expect after treatment?
While ultrasound energy is concentrated in the tissue, you may feel heat or a sharp, tingling pain, and the degree of discomfort varies with the area, the energy settings and your individual sensitivity.
After treatment, the area may be briefly red, swollen or tender to the touch. In rare cases, side effects such as burns, altered sensation, nerve damage and fat atrophy can occur. Changes in elasticity are also hard to gauge from how you look right after treatment.
This is because collagen takes time to reorganize after thermal stimulation, and when changes appear and how much they show differ from person to person. If your face has little volume, you should watch not only for changes in elasticity but also for how your contour changes. If you are considering Ultherapy PRIME at an Apgujeong Rodeo dermatology clinic, check your previous lifting history, skin condition and the expected recovery process in advance.



The volume you keep matters as much as the lift
Ultherapy PRIME is a lifting device that delivers energy to tissue beneath the skin with reference to ultrasound imaging. On a slim face, looking after the volume you already have is as necessary as treating the areas that sag. The cause of lost elasticity, the thickness of the fat layer and the balance of the whole face need to be considered together.
If you are thinking about Ultherapy PRIME at an Apgujeong Rodeo dermatology clinic, take the time to understand the changes you can expect given your facial structure, and the limits of the treatment. In lifting a slim face, how much can be lifted and which volume should be maintained are equally important standards.



Short answers to worries about hollow cheeks
How does Ultherapy PRIME work? It concentrates micro-focused ultrasound at specific depths beneath the skin to create thermal coagulation points and trigger a collagen remodeling response.
Can I have it if I have very little facial fat? Having a slim face does not by itself decide whether you can have it. Suitability is judged after checking skin thickness, fat volume and the cause of sagging.
Can my cheeks become hollow after treatment? Fat atrophy or changes in volume are possible. If you have little facial fat, the treatment area and energy settings are decided with extra care.
How is the depth decided? We consider skin thickness, fat distribution and the location of the target tissue, and also refer to the tissue structure seen on ultrasound imaging.
When will I notice changes? The thermal response and collagen remodeling take time, so progress is followed over several weeks to several months. The timing and degree vary from person to person.
Written by : Dr. Lee Young-hoon, Chief Director, RIOVE Clinic, Profile Last reviewed : 2026-11-15 This article contains general medical information. Treatment results and recovery vary from person to person, and side effects such as redness, swelling, tenderness, burns, altered sensation, nerve damage or fat atrophy may occur. The actual scope of use and suitability are judged based on a doctor's examination and the approved indications of the product or device, and individual diagnosis and treatment plans are determined through an in-person consultation.
If a treatment interests you, we'll go over it together in the exam room
Whether a treatment is suitable, and how it is done, is decided after we check your individual condition. For more details, please call our main line.
